Expedition XP106 Battery Replacement
- Unplug all from the back of the mixer including power.
- Remove the 4 screws holding the lower rear battery cover and remove cover.
- Remove 2 screws holding the metal battery retainer.
- Pull battery out by the material strap and disconnect the RED and BLACK wires.
- Connect the RED and BLACK wires to the RED and BLACK terminals on the new battery and push the battery into the battery compartment.
- Replace the metal battery retainer using the 2 screws. 7. Replace the plastic battery cover using the 4 screws.
Comments
0 comments
Please sign in to leave a comment.