Follow

How to Pair the XPD1 System

Follow the steps bellow to pair your XPD1 Wireless System:  

  1. Plug the RXD1 receiver into a computer or Samson compatible PA System. The receiver should receive power from the connected device. 
  2. Turn on the transmitter.
  3. Hold the pair button on the receiver for more than 5 seconds, until the indicator begins to flash. 
  4. Hold the power button on the transmitter for more than 5 seconds, until the indicator begins to flash. 
  5. When paired the indicator lights on the transmitter and receiver will light steady. (The receiver light will go dark for 1 second and come back on as a solid light as it completing the pairing process).
  6. From there, your XPD1 system is paired and ready for operation.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.