LH500/LH1000 Direct Output

The LH500 and LH1000 both feature a front panel DIRECT OUTPUT connector used for interfacing to external recording and PA gear. This standard, balanced XLR connector provides a Line-level pre-EQ and pre-VOLUME output signal from the LH Series amplifier. You’ll usually use this to connect the LH Series signal to a Mic-level input when interfacing with PA systems or recording mixing consoles.

If you need to connect the LH Series to a PA system or a recording mixing console, connect a cable between the front-panel DIRECT OUTPUT and a Mic-level input on the mixer.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Please sign in to leave a comment.